The FLO-CORP AccuSolar™ Solar Powered Level Monitoring System uses WIFI to communicate up to 1,500 feet to a base station computer. The ideal solution for level applications, from minerals and mining to pulp and paper.
The Conserver™ Solar Powered System converts light into energy and generates electricity in flow and level measurement applications where electrical power is not accessible, available or practical. The Conserver™ consists of a Solar Panel, Rechargeable Battery, Solar Charge Controllers, Cables and Optional Time Delay Circuit Board. The solar panel is constructed with high efficiency polycrystalline solar cells and produces higher output per module than others in its class. The rechargeable sealed lead acid battery has a long lasting life dependency of 4-5 years. The solar charge controllers connect between the solar panel and the battery and protect the battery from over charging. Converting sunlight into energy, solar panels are quickly becoming the most cost efficient way to generate electricity. Solar energy is not only sustainable but it is always renewable, meaning it will never run out. Typical applications include chemical, petrochemicals, energy, minerals and mining, oil and gas, pulp and paper, wastewater, remote locations, sticky and dirty media, pump stations, the possibilities are endless. Add the Conserver™ system to any FLO-CORP product to power application.
BENEFITS
Saves Money: No need for trenching during installation
Cuts Energy Costs: No external energy source required
Highly Adaptable: Powers any AC or DC electronics system
Warranty: Five-year warranty available
Compatible Products
DCX2 Digital Process Meter // CD3D Flexible Process Meter // LTRP Ultrasonic Level Transmitter // LTRP-1 Ultrasonic Level Transmitter // LTRE Ultrasonic Level Transmitter // LTT1 Guided Wave Radar Level Transmitter // LTT1-2G 2nd Generation Radar Level Transmitter // MFT2 2-Wire Flow Transmitter // MFFS3 Universal Single Or Dual Flow Switch System
Industries | Aerospace, Agriculture, Chemical & Petrochemical, Environmental Water & Wastewater, Food & Beverage, Government Agencies, Iron, Steel & Metal, Life Sciences, Minerals & Mining, Oil & Gas, Original Equipment Manufacturers, Power & Energy, Pulp & Paper, Refined Products, Renewable Energy |
---|---|
Product System | AccuSolar™ Solar Powered Level Monitoring System |
Driver License Terms The software you can download from this web site ("the Software") is provided by Future Technology Devices International Limited ("FTDI") subject to the license terms set out at http://www.ftdichip.com/FTDriverLicenceTerms.htm ("the License Terms"). You must read the License Terms before downloading the Software. By installing or using the Software you agree to the License Terms. If you do not agree to the License Terms then do not download or use the Software. Without prejudice to the License Terms, here is a summary of some of the key terms of the License Terms (and in the event of any conflict between this summary and the License Terms then the text of the License Terms will prevail). The license only allows use of the Software with, and the Software will only work with Genuine FTDI Components (as defined in the License Terms). Use of the Software as a driver for a component that is not a Genuine FTDI Component MAY IRRETRIEVABLY DAMAGE THAT COMPONENT. It is your responsibility to make sure that all chips you use the Software as a driver for are Genuine FTDI Components. If in doubt then contact FTDI. The Software is provided "as is''. There are no warranties (or similar) in relation to the quality of the Software. There are exclusions of FTDI liability for certain types of loss such as: special loss or damage; incidental loss or damage; indirect or consequential loss or damage; loss of income; loss of business; loss of profits; loss of revenue; loss of contracts; business interruption; loss of the use of money or anticipated savings; loss of information; loss of opportunity; loss of goodwill or reputation; and/or loss of, damage to or corruption of data. There is a monetary cap on FTDI's liability. If a custom vendor ID and/or product ID or description string are used, it is the responsibility of the product manufacturer to maintain any changes and subsequent WHQL re-certification as a result of making these changes.