The FLO-CORP Tracer Air™ 80GHz LTTA-80 Radar Level Transmitter is a non-contact solution that’s ideal for difficult applications, such as vapor, steam, and foam. Precision measurement for aggressive, corrosive or non-corrosive liquid level monitoring.
Part Number: LTTA-80
The Tracer Air™ 80GHz Radar Level Transmitter is accurate, easy to use and cost efficient. Featuring through the air technology, the radar level antenna emits narrow microwave beam that transmit down the antenna. The signal comes into contact with the application surface then reflects back to the device.
The Tracer Air™ 80GHz is pre-calibrated at our facility for easy installation. Some typical applications include aggressive, corrosive or non-corrosive liquid level monitoring, small tank or process vessel, bulk tote tanks and difficult measurement applications. FMCW Radar technology provides a smaller beam angel (3º or 8º) depending on configuration, then typical through air radar devices.
BENEFITS
Maximum Accuracy: Specifically calibrated for customer’s application
Highly Adaptable: Accurate measurements of vapor, steam, pressure, changes of temperature, dust and foam
Easy Installation: Specifically calibrated for customer’s application
Enhanced Safety: Overflow prevention from programmable fail safe mode
Warranty: Five-year warranty available
Specification Summary
Range: Up to 398 feet
Measurement: Liquids, Slurries, Solids
Accuracy: ±0.1″
Process Connection: 1 1/2″ NPT or ANSI or 3″ NPT or ANSI Flange
Communication: 2-Wire with HART® or 4-Wire 485 with Modbus
Enclosure: Intrinsically safe (Exia IIC T6 Ga), Aluminum / IP67
Compatible Products
CD3D Flexible Process Meter
Technology | Radar |
---|---|
Medium | Liquids & Solids |
Product Type | Transmitters |
Industries | Aerospace, Agriculture, Government Agencies, Iron, Steel & Metal, Life Sciences, Minerals & Mining, Original Equipment Manufacturers, Power & Energy, Pulp & Paper, Refined Products, Renewable Energy |
Part Number | LTTA, LTTA-P-N1-3-2-AA, LTTA-S-N1-1-1-AA, LTTA-S-N1-1V-2A-NY, LTTA-S-N1-3-2-A-N, LTTA-S-N1-3-2-SN |
The FLO-CORP Ranger Two™ LTRP-2 Ultrasonic Level Transmitter (measurement up to 30ft.) is designed for level and distance measurement in remote monitoring and other difficult outdoor applications. Features include a stainless steel housing for rugged indoor or outdoor use, surge protection, and the ability to connect to one sensor up to 32 sensors optimized with RS-485 output to the CONNEX 3D Cellular Monitor.
Part Number: LTRP-2
Driver License Terms The software you can download from this web site ("the Software") is provided by Future Technology Devices International Limited ("FTDI") subject to the license terms set out at http://www.ftdichip.com/FTDriverLicenceTerms.htm ("the License Terms"). You must read the License Terms before downloading the Software. By installing or using the Software you agree to the License Terms. If you do not agree to the License Terms then do not download or use the Software. Without prejudice to the License Terms, here is a summary of some of the key terms of the License Terms (and in the event of any conflict between this summary and the License Terms then the text of the License Terms will prevail). The license only allows use of the Software with, and the Software will only work with Genuine FTDI Components (as defined in the License Terms). Use of the Software as a driver for a component that is not a Genuine FTDI Component MAY IRRETRIEVABLY DAMAGE THAT COMPONENT. It is your responsibility to make sure that all chips you use the Software as a driver for are Genuine FTDI Components. If in doubt then contact FTDI. The Software is provided "as is''. There are no warranties (or similar) in relation to the quality of the Software. There are exclusions of FTDI liability for certain types of loss such as: special loss or damage; incidental loss or damage; indirect or consequential loss or damage; loss of income; loss of business; loss of profits; loss of revenue; loss of contracts; business interruption; loss of the use of money or anticipated savings; loss of information; loss of opportunity; loss of goodwill or reputation; and/or loss of, damage to or corruption of data. There is a monetary cap on FTDI's liability. If a custom vendor ID and/or product ID or description string are used, it is the responsibility of the product manufacturer to maintain any changes and subsequent WHQL re-certification as a result of making these changes.