Product Information
The UltraFlo™ UFD3S Clamp-On Ultrasonic Flow Meter is the ideal flow meter for small pipes with accurate, easy-to-use, easy-to-install digital ultrasonic technology. The UltraFlo™ UFD3S is offered as a fixed permanent mount installation. The UFD3S is extremely rugged, reliable and durable.
Part Number: UFD3S
The UltraFlo™ UFD3S Clamp-On Ultrasonic Flow Meter is the ideal flow meter for small pipes with accurate, easy-to-use, easy-to-install digital ultrasonic technology. The UltraFlo™ UFD3S is offered as a fixed permanent mount installation. The UFD3S is extremely rugged, reliable and durable. The flow meters are housed in a NEMA 4X fully sealed enclosure to withstand the most severe conditions. The patented Digital Ultrasonic technology will measure just about any liquid or fluid from potable water to oils and chemicals and fly ash slurries. The easy to read LCD alpha-numeric display, versatile AC & DC power operation, digital communications, batch control and data log events are all packaged in an affordable industrial design. Because the UltraFlo™ UFD3S sensors are clamped onto the outside of the pipe, the installation costs are a fraction of installed costs of traditional in-line flow meters. Plus, the sensors and electronics are immune to the process conditions regardless of process pressures, temperatures and build-up or scaling conditions. The Digital Ultrasonic transducers will mount to just about any size pipe regardless of pipe wall thickness and any pipe material.
BENEFITS
Convenient: Avoids pressure loss or media contamination problems
Maximum Accuracy: Specifically calibrated for customer’s application
Maintenance-Free: Transmitter electronics completely isolated from process
Lowest Installed Cost: Clamps to the outside of the pipe – no cutting or installing in pipe required
Warranty: Five-year warranty available
| Installation Type | Clamp-on |
|---|---|
| Medium | Liquids |
| Product Type | Switches |
| Industries | Agriculture, Chemical & Petrochemical, Environmental Water & Wastewater, Food & Beverage, Iron, Steel & Metal, Minerals & Mining, Oil & Gas, Power & Energy, Pulp & Paper, Renewable Energy |
| Part Number | UFDD |
Related products
CalFlo™ CFAF Thermal Mass Air Flow Meter
PDFlo™ PDSR1 & PDSR2 Spur Gear Sensor
ChannelFlo™ UOCM Ultrasonic Open Channel Flow Meter
Driver License Terms The software you can download from this web site ("the Software") is provided by Future Technology Devices International Limited ("FTDI") subject to the license terms set out at http://www.ftdichip.com/FTDriverLicenceTerms.htm ("the License Terms"). You must read the License Terms before downloading the Software. By installing or using the Software you agree to the License Terms. If you do not agree to the License Terms then do not download or use the Software. Without prejudice to the License Terms, here is a summary of some of the key terms of the License Terms (and in the event of any conflict between this summary and the License Terms then the text of the License Terms will prevail). The license only allows use of the Software with, and the Software will only work with Genuine FTDI Components (as defined in the License Terms). Use of the Software as a driver for a component that is not a Genuine FTDI Component MAY IRRETRIEVABLY DAMAGE THAT COMPONENT. It is your responsibility to make sure that all chips you use the Software as a driver for are Genuine FTDI Components. If in doubt then contact FTDI. The Software is provided "as is''. There are no warranties (or similar) in relation to the quality of the Software. There are exclusions of FTDI liability for certain types of loss such as: special loss or damage; incidental loss or damage; indirect or consequential loss or damage; loss of income; loss of business; loss of profits; loss of revenue; loss of contracts; business interruption; loss of the use of money or anticipated savings; loss of information; loss of opportunity; loss of goodwill or reputation; and/or loss of, damage to or corruption of data. There is a monetary cap on FTDI's liability. If a custom vendor ID and/or product ID or description string are used, it is the responsibility of the product manufacturer to maintain any changes and subsequent WHQL re-certification as a result of making these changes.