Product Information
The FLO-CORP ChannelFlo™ UOCM Ultrasonic Open Channel Flow Meter’s signal processing does not come in contact with the flow stream. The ideal measurement solution for liquid applications, from gravity fed sewer lines to storm water monitoring.
Part Number: UOCM
The ChannelFlo™ Ultrasonic Open Channel Flow Meter is an all-in-one solution for open channel flow measurement. The UOCM is able to provide accurate measurements in a wide variety of applications such as small streams, sewers, large rivers, V-notch weirs and flumes. Our technology allows precision continuous measurement that allows the user to monitor remotely at the convenience of a PC or locally at the display. All of our ChannelFlo™ systems are calibrated for your specific application prior to leaving our factory for easy setup and installation in the field. In an Open Channel application it is very important to have a quality, durable and accurate level measurement sensor. Our Ranger Plus™ Ultrasonic Level Transmitter measures up to 35 feet, has (3) Analog Outputs and (2) Switches. The next component in the UOCM system is an intuitive, reliable monitoring device. Our CONNEX 3D™ Flexible Process Monitor is a bright, 6-digit LED display with an internal DC power supply for transmitter power, 4-20 mA repeat output and advanced communications. The CONNEX 3D™ is supplied with a remote monitoring software called DigaLink 3.0, that has the capability to remotely monitor, receive e-mail alerts, data log and much more. If you require pump control the eXmod™ Relay Expansion module is recommended. The eXmod connects to the CONNEX 3D™ via RS-485 serial communication (4-wire) and provides a 10 AMP AC/DC rated relay to maximize the systems capabilities.
BENEFITS
User Friendly: Bright LED display
Maintenance-Free: Measurement does not come in contact with process fluid
Maximum Accuracy: Specifically calibrated for customer’s application
Highly Adaptabile: Works in any open channel flow application
Saves Money: Low cost of ownership
Warranty: Five-year warranty available
Specification Summary
Sensing Range: 4″-120″ (102mm-3m)
Repeatability: > ±0.03″
Temperature: -40 to 158F
Humidity: 0 to 100% Operating
| Installation Type | Open Channel |
|---|---|
| Medium | Liquids |
| Product Type | Meters |
| Industries | Agriculture, Chemical & Petrochemical, Environmental Water & Wastewater, Food & Beverage, Government Agencies, Life Sciences, Minerals & Mining, Original Equipment Manufacturers, Power & Energy, Pulp & Paper, Refined Products, Renewable Energy |
| Part Number | UOCM |
Related products
PDFlo™ PDTX4 Four-Wire Flow Transmitter/Monitor
MEMFlo™ MFTV Volumetric VA Flow Meter
PDFlo™ PDFOP Fiber Optic Sensor
Driver License Terms The software you can download from this web site ("the Software") is provided by Future Technology Devices International Limited ("FTDI") subject to the license terms set out at http://www.ftdichip.com/FTDriverLicenceTerms.htm ("the License Terms"). You must read the License Terms before downloading the Software. By installing or using the Software you agree to the License Terms. If you do not agree to the License Terms then do not download or use the Software. Without prejudice to the License Terms, here is a summary of some of the key terms of the License Terms (and in the event of any conflict between this summary and the License Terms then the text of the License Terms will prevail). The license only allows use of the Software with, and the Software will only work with Genuine FTDI Components (as defined in the License Terms). Use of the Software as a driver for a component that is not a Genuine FTDI Component MAY IRRETRIEVABLY DAMAGE THAT COMPONENT. It is your responsibility to make sure that all chips you use the Software as a driver for are Genuine FTDI Components. If in doubt then contact FTDI. The Software is provided "as is''. There are no warranties (or similar) in relation to the quality of the Software. There are exclusions of FTDI liability for certain types of loss such as: special loss or damage; incidental loss or damage; indirect or consequential loss or damage; loss of income; loss of business; loss of profits; loss of revenue; loss of contracts; business interruption; loss of the use of money or anticipated savings; loss of information; loss of opportunity; loss of goodwill or reputation; and/or loss of, damage to or corruption of data. There is a monetary cap on FTDI's liability. If a custom vendor ID and/or product ID or description string are used, it is the responsibility of the product manufacturer to maintain any changes and subsequent WHQL re-certification as a result of making these changes.