The FLO-CORP CalFlo™ CFVF2 Thermal Mass Liquid Flow Meter is ideal for handling aggressive and hard to measure media. Precision measurement for liquid applications, from non-potable water to diluted corrosive liquids.
Part Number: CFVF2
The CalFlo™ CFVF2 Thermal Mass Liquid Flow Meter is a great choice for a wide range of liquid applications. The CFVF2 provides high accuracy measurement of flow, including very low flow rates, using a solid state design with NO moving parts. The CFVF2 features an adjustable measuring range, easily adjusts to variable insertion depths, and fit pipes up to 24” in diameter. Typical applications include potable water, non-potable water, deionized water, sulfuric acid, light oil, and diluted corrosive liquids.
BENEFITS
Low Maintenance: No moving parts to replace
Easy Installation: Minimum straight pipe required and standard NPT process connection
Saves Money: Low cost of ownership
Warranty: Five-year warranty available
Specification Summary
Pressure: 261 psi (18 bar)
Accuracy: < 3%
Repeatability: < 1% / Response time to flow rate change 10 sec. typ.
Supply Voltage: 24 VDC ± 10%
Consumption: Approx. 100-200 mA
Output: 4-20 mA
Resistive Load: 0-600 Ohm
Installation Type | Insertion |
---|---|
Medium | Liquids |
Product Type | Meters |
Industries | Agriculture, Chemical & Petrochemical, Environmental Water & Wastewater, Government Agencies, Life Sciences, Minerals & Mining, Oil & Gas, Original Equipment Manufacturers, Power & Energy, Refined Products |
Part Number | CFVF2 |
Driver License Terms The software you can download from this web site ("the Software") is provided by Future Technology Devices International Limited ("FTDI") subject to the license terms set out at http://www.ftdichip.com/FTDriverLicenceTerms.htm ("the License Terms"). You must read the License Terms before downloading the Software. By installing or using the Software you agree to the License Terms. If you do not agree to the License Terms then do not download or use the Software. Without prejudice to the License Terms, here is a summary of some of the key terms of the License Terms (and in the event of any conflict between this summary and the License Terms then the text of the License Terms will prevail). The license only allows use of the Software with, and the Software will only work with Genuine FTDI Components (as defined in the License Terms). Use of the Software as a driver for a component that is not a Genuine FTDI Component MAY IRRETRIEVABLY DAMAGE THAT COMPONENT. It is your responsibility to make sure that all chips you use the Software as a driver for are Genuine FTDI Components. If in doubt then contact FTDI. The Software is provided "as is''. There are no warranties (or similar) in relation to the quality of the Software. There are exclusions of FTDI liability for certain types of loss such as: special loss or damage; incidental loss or damage; indirect or consequential loss or damage; loss of income; loss of business; loss of profits; loss of revenue; loss of contracts; business interruption; loss of the use of money or anticipated savings; loss of information; loss of opportunity; loss of goodwill or reputation; and/or loss of, damage to or corruption of data. There is a monetary cap on FTDI's liability. If a custom vendor ID and/or product ID or description string are used, it is the responsibility of the product manufacturer to maintain any changes and subsequent WHQL re-certification as a result of making these changes.