The FLO-CORP PDFlo™ PDSR1 Single Hall Effect Sensor detects the rotation of the PDFlo Flow Meter’s gears and emits a frequency signal proportional to flow. The ideal measurement solution for liquid applications, from fuel to polyurethane.
Part Number: PDSR1
The PDFlo™ PDSR1 is a single hall effect sensor that is compatible with PDFlo Positive Displacement Flow Meters. This sensor detects the rotation of the flow meter’s gears and emits a frequency signal proportional to flow. The output signal is a square wave pulse which has a duty cycle of approximately 50%. The PDSR1 has signal outputs that are protected with a self-resetting fuse. This fuse has a 50mA nominal trip point. When a trip occurs, turn off power to the sensor and remove output load to reset fuse. The PDSR1 is supplied with a sinking (non-powered) output or a sourcing (powered) frequency output.
BENEFITS
Maintenance-Free: Transmitter electronics completely isolated from process
Durable: Completely sealed sensor in stainless steel housing
Warranty: One-year warranty available
Specification Summary
Supply Voltage: PDSR1: +10 to 28 VDC; PDSR2: +10 to 27 VDC
Minimum Signal: 0.5 Hz
Driving Capacity: 50mA Max resistance load
Temperature Range: -40ºF to 185ºF (-40º to 85ºC)
Compatible Products
PDSG1 Positive Displacement Spur Gear Flow Meter
Installation Type | In line |
---|---|
Medium | Liquids |
Product Type | Sensor |
Industries | Aerospace, Chemical & Petrochemical, Environmental Water & Wastewater, Government Agencies, Iron, Steel & Metal, Life Sciences, Oil & Gas, Original Equipment Manufacturers, Power & Energy, Refined Products |
Part Number | PDSR1 |
You must be logged in to post a review.
Driver License Terms The software you can download from this web site ("the Software") is provided by Future Technology Devices International Limited ("FTDI") subject to the license terms set out at http://www.ftdichip.com/FTDriverLicenceTerms.htm ("the License Terms"). You must read the License Terms before downloading the Software. By installing or using the Software you agree to the License Terms. If you do not agree to the License Terms then do not download or use the Software. Without prejudice to the License Terms, here is a summary of some of the key terms of the License Terms (and in the event of any conflict between this summary and the License Terms then the text of the License Terms will prevail). The license only allows use of the Software with, and the Software will only work with Genuine FTDI Components (as defined in the License Terms). Use of the Software as a driver for a component that is not a Genuine FTDI Component MAY IRRETRIEVABLY DAMAGE THAT COMPONENT. It is your responsibility to make sure that all chips you use the Software as a driver for are Genuine FTDI Components. If in doubt then contact FTDI. The Software is provided "as is''. There are no warranties (or similar) in relation to the quality of the Software. There are exclusions of FTDI liability for certain types of loss such as: special loss or damage; incidental loss or damage; indirect or consequential loss or damage; loss of income; loss of business; loss of profits; loss of revenue; loss of contracts; business interruption; loss of the use of money or anticipated savings; loss of information; loss of opportunity; loss of goodwill or reputation; and/or loss of, damage to or corruption of data. There is a monetary cap on FTDI's liability. If a custom vendor ID and/or product ID or description string are used, it is the responsibility of the product manufacturer to maintain any changes and subsequent WHQL re-certification as a result of making these changes.
Reviews
There are no reviews yet.