Product Information
**DISCONTINUED** replacement is: TRACER 1000™ 3G GWR LEVEL TRANSMITTER. The FLO-CORP Tracer 1000™ LTT1-2G Guided Wave Radar Level Transmitter features time domain reflectometry (TDR) technology for continuous measurement in liquids, solids and slurries, from asphalt blending tanks to peanuts and paper.
Part Numbers: LTT1-2G [DISCONTINUED], Replaced with Part Number: LTT1-3G
Featuring TDR (Time Domain Reflectometry) technology, the Tracer 1000™ second generation Guided Wave Radar level transmitter provides continuous level measurement in liquids, solids and slurries. This innovative device has almost no installation restrictions in tanks, silo’s and bins up to 80 feet. The Tracer 1000™ 2G has a fully isolated 4-20 mA output that can be scaled for tank level or distance. The unit requires 18 to 30 VDC power. The 4-wire device comes standard with a RS-485 COMMS output can be connected to the Tracer Talker™ software for custom configurations and detailed level processing analysis. The Tracer 1000™ 2G ships pre-calibrated precisely for the customer’s application for quick installation and setup. If adjustment is needed in the field the RS485 Communication Tool and Tracer Talker™ software is recommended. TDR technology is not affected by pressure, vacuum, temperature, viscosity, foam or dust. Changes in dielectric constant or coating of the probe do not affect the level measurement due to the dynamic sensing technology programmed into the artificial intelligence of the Tracer 1000™ 2G GWR level transmitter.
BENEFITS
Reliable Measurement: High-frequency radar impulses
Easy Operation: Auto-calibration to any dielectric
Maximum Accuracy: Specifically calibrated for customer’s application
Easy Installation: Specifically calibrated for customer’s application
Highly Adaptable: Changes in viscosity, density, or acidity do not effect accuracy. Boiling surfaces, dust, foam, vapor do not effect device performance
Warranty: Five-year warranty available
Specification Summary
Range: 1.2′ – 80′ with minimum dielectric constant of 1.0
Measurement: Liquids, Slurries, Solids
Accuracy: ± 0.039″ (1 mm) or 0.02% of measured distance, whichever is greater
Process Mount: Standard: 1.50″ MNPT | Option: 1.50″ ANSI 150lb. flange
Approvals: A22 ATEX Grp II Cat 3 GD T75°C IP67 Tamb -40°C to 65°C
Compatible Products
DCX2 Digital Process Meter // CD3D Flexible Process Meter // DXM1 Relay Expansion Module
| Technology | Radar |
|---|---|
| Medium | Liquids & Solids |
| Product Type | Transmitters |
| Industries | Agriculture, Government Agencies, Iron, Steel & Metal, Life Sciences, Minerals & Mining, Original Equipment Manufacturers, Power & Energy, Pulp & Paper, Refined Products, Renewable Energy |
| Part Number | LTT1-2G, LTT1-2G-4-RN6-0-1, LTT1-2G-4-WN4-01, LTT1-2G-4-WN6-0-1, LTT1-2G-4-WN7-01 |
Related products
PDFlo™ PDSR1 & PDSR2 Spur Gear Sensor
Tracer 1000™ 3G LTT1-3G 3rd Generation Radar Level Transmitter (up to 60ft)
Tracer 1000™ LTT1 Guided Wave Radar Level Transmitter (up to 65ft)
Driver License Terms The software you can download from this web site ("the Software") is provided by Future Technology Devices International Limited ("FTDI") subject to the license terms set out at http://www.ftdichip.com/FTDriverLicenceTerms.htm ("the License Terms"). You must read the License Terms before downloading the Software. By installing or using the Software you agree to the License Terms. If you do not agree to the License Terms then do not download or use the Software. Without prejudice to the License Terms, here is a summary of some of the key terms of the License Terms (and in the event of any conflict between this summary and the License Terms then the text of the License Terms will prevail). The license only allows use of the Software with, and the Software will only work with Genuine FTDI Components (as defined in the License Terms). Use of the Software as a driver for a component that is not a Genuine FTDI Component MAY IRRETRIEVABLY DAMAGE THAT COMPONENT. It is your responsibility to make sure that all chips you use the Software as a driver for are Genuine FTDI Components. If in doubt then contact FTDI. The Software is provided "as is''. There are no warranties (or similar) in relation to the quality of the Software. There are exclusions of FTDI liability for certain types of loss such as: special loss or damage; incidental loss or damage; indirect or consequential loss or damage; loss of income; loss of business; loss of profits; loss of revenue; loss of contracts; business interruption; loss of the use of money or anticipated savings; loss of information; loss of opportunity; loss of goodwill or reputation; and/or loss of, damage to or corruption of data. There is a monetary cap on FTDI's liability. If a custom vendor ID and/or product ID or description string are used, it is the responsibility of the product manufacturer to maintain any changes and subsequent WHQL re-certification as a result of making these changes.